Üyelik
Alışveriş
Gümrük
Ödeme
Önemli Bilgi: Bu lastik pompası yalnızca 12 Volt DC için tasarlanmış olup 12V-DC Sigara Çakmağı Soket Fişi ile donatılmıştır. 24 Volt, LT, HT ve herhangi bir Kamyon Lastiğini desteklemez.
Önemli Özellikler:
- Dijital Lastik Pompası
- Dijital Lastik Ölçer
- Araç Aksesuar Soket Uzatma Kablosu
- Jumper Kablo
- 2 Adet Dijital Lastik Ölçer
Teknik Özellikler: -
Çalışma gerilimi: DC12V
- Nominal güç: 120W
- Şişirme Hızı: 1.06 CFM
- Min. Amper: 10 Amper
- Maksimum Amper: 15 Amper
- LED el feneri: Parlak Torch
- Maksimum Çalışma Basıncı: 70 PSI
- Ekran Birimleri:
KPA, PSI, BAR, KG/CM - Güç kablosu 15 amper sigorta ile donatılmış olup yedek sigorta paket içinde bulunmaktadır
- Aşırı ısınma koruyucusu, 167°F'yi aştığında üniteyi kapatır
- CE sertifikalı
Kullanım Talimatları:
1. Güç anahtarının KAPALI konumda olduğundan ve araç motorunun çalıştığından emin olun.
2. Lastik valfından toz kapağı çıkarın, hava çubuğunu lastik valfına takın ve lastik valfinin üzerine vida yapın.
3. Güç kablosunu 12V sigara çakmağı soketine takın.
4. (M) düğmesine basarak ekran birimini (PSI, KPA, BAR, KG/CM) seçin.
5. (-) veya (+) düğmesine basarak istenilen basıncı ayarlayın ve flaş durana kadar bekleyin.
6. Güç anahtarını açın. Kompresör, istenilen basınca ulaşıldığında otomatik olarak şişirmeyi durduracaktır.
7. İstenilen basınca ulaşıldığında gücü KAPATIN.
Valf Konnektörünü İstenilen Basınçla Ayırma:
Vana konnektörünü ayırdığınızda, valf bağlantısı tamamen ayrılana kadar lastik valfi hava salabilir. Bu normaldir ve makinede istenilen PSI değerini ayarlayarak kabul edilebilir. Örneğin, 32 PSI ayarlarsanız, makine valf konnektörü ayırılırken hava kaybını hesaba katmak için 32.5 PSI'ye kadar pompalamaya devam edecektir.
Websitemizde listelenen ürünler, daha evvel talep edilen ürünlerin gösterimleridir. Türkçe açıklamalarında Google Translate kullanıldığından anlam bozuklukları olabilir. Ürün fiyatlarına ek ödemeniz olacaktır.Important Information before your Purchase: This tire inflator is designed for 12 Volt DC ONLY, equipped with a 12V-DC Cigarette Lighter Socket Plug. It does NOT support 24 Volt, LT, HT, and any Truck Tires.
Key Features:
- Digital Tire Inflator
- Digital Tire Gauge
- Extension Cord of Vehicle Accessory Socket
- Jumper Cable
- 2PCs Digital Tire Gauge
Specification:
- Working voltage: DC12V
- Rating power: 120W
- Inflating Speed: 1.06 CFM
- Min. Amp: 10 Amps
- Maximum Amp: 15 Amps
- LED flashlight: Bright Torch
- Maximum Working Pressure: 70 PSI
- Display Units: KPA, PSI, BAR, KG/CM
- The power cable is with a 15 amps fuse, and there is a backup fuse in the package
- Overheat protector will shut off the unit when it exceeds 167°F
- CE certified
Operating Instructions:
- Make sure the power switch is at the OFF position and the vehicle engine is running.
- Remove the dust cap from the tire valve, attach the air chuck to the tire valve stem, and screw onto the tire’s valve stem.
- Plug the power cord into a 12V cigarette lighter socket.
- Press the (M) button to choose the display unit (PSI, KPA, BAR, KG/CM).
- Press the (-) or (+) button to set the desired pressure, then wait until it stops flashing.
- Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
- When the desired pressure is reached, turn OFF the power.
Valve Connector Detaching with Desired Pressure:
When detaching the valve connector, the tire valve may release air until the connector is fully detached. This is normal and can be accepted by setting the desired PSI value on the machine. For example, if you set 32 PSI, the machine will keep pumping to 32.5 PSI before stopping to account for air loss when detaching the valve connector.
Customs and shipping fees are not included. You will be charged when we receive your items.Önemli Bilgi: Bu lastik pompası yalnızca 12 Volt DC için tasarlanmış olup 12V-DC Sigara Çakmağı Soket Fişi ile donatılmıştır. 24 Volt, LT, HT ve herhangi bir Kamyon Lastiğini desteklemez.
Önemli Özellikler:
- Dijital Lastik Pompası
- Dijital Lastik Ölçer
- Araç Aksesuar Soket Uzatma Kablosu
- Jumper Kablo
- 2 Adet Dijital Lastik Ölçer
Teknik Özellikler: -
Çalışma gerilimi: DC12V
- Nominal güç: 120W
- Şişirme Hızı: 1.06 CFM
- Min. Amper: 10 Amper
- Maksimum Amper: 15 Amper
- LED el feneri: Parlak Torch
- Maksimum Çalışma Basıncı: 70 PSI
- Ekran Birimleri:
KPA, PSI, BAR, KG/CM - Güç kablosu 15 amper sigorta ile donatılmış olup yedek sigorta paket içinde bulunmaktadır
- Aşırı ısınma koruyucusu, 167°F'yi aştığında üniteyi kapatır
- CE sertifikalı
Kullanım Talimatları:
1. Güç anahtarının KAPALI konumda olduğundan ve araç motorunun çalıştığından emin olun.
2. Lastik valfından toz kapağı çıkarın, hava çubuğunu lastik valfına takın ve lastik valfinin üzerine vida yapın.
3. Güç kablosunu 12V sigara çakmağı soketine takın.
4. (M) düğmesine basarak ekran birimini (PSI, KPA, BAR, KG/CM) seçin.
5. (-) veya (+) düğmesine basarak istenilen basıncı ayarlayın ve flaş durana kadar bekleyin.
6. Güç anahtarını açın. Kompresör, istenilen basınca ulaşıldığında otomatik olarak şişirmeyi durduracaktır.
7. İstenilen basınca ulaşıldığında gücü KAPATIN.
Valf Konnektörünü İstenilen Basınçla Ayırma:
Vana konnektörünü ayırdığınızda, valf bağlantısı tamamen ayrılana kadar lastik valfi hava salabilir. Bu normaldir ve makinede istenilen PSI değerini ayarlayarak kabul edilebilir. Örneğin, 32 PSI ayarlarsanız, makine valf konnektörü ayırılırken hava kaybını hesaba katmak için 32.5 PSI'ye kadar pompalamaya devam edecektir.
Websitemizde listelenen ürünler, daha evvel talep edilen ürünlerin gösterimleridir. Türkçe açıklamalarında Google Translate kullanıldığından anlam bozuklukları olabilir. Ürün fiyatlarına ek ödemeniz olacaktır.Important Information before your Purchase: This tire inflator is designed for 12 Volt DC ONLY, equipped with a 12V-DC Cigarette Lighter Socket Plug. It does NOT support 24 Volt, LT, HT, and any Truck Tires.
Key Features:
- Digital Tire Inflator
- Digital Tire Gauge
- Extension Cord of Vehicle Accessory Socket
- Jumper Cable
- 2PCs Digital Tire Gauge
Specification:
- Working voltage: DC12V
- Rating power: 120W
- Inflating Speed: 1.06 CFM
- Min. Amp: 10 Amps
- Maximum Amp: 15 Amps
- LED flashlight: Bright Torch
- Maximum Working Pressure: 70 PSI
- Display Units: KPA, PSI, BAR, KG/CM
- The power cable is with a 15 amps fuse, and there is a backup fuse in the package
- Overheat protector will shut off the unit when it exceeds 167°F
- CE certified
Operating Instructions:
- Make sure the power switch is at the OFF position and the vehicle engine is running.
- Remove the dust cap from the tire valve, attach the air chuck to the tire valve stem, and screw onto the tire’s valve stem.
- Plug the power cord into a 12V cigarette lighter socket.
- Press the (M) button to choose the display unit (PSI, KPA, BAR, KG/CM).
- Press the (-) or (+) button to set the desired pressure, then wait until it stops flashing.
- Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
- When the desired pressure is reached, turn OFF the power.
Valve Connector Detaching with Desired Pressure:
When detaching the valve connector, the tire valve may release air until the connector is fully detached. This is normal and can be accepted by setting the desired PSI value on the machine. For example, if you set 32 PSI, the machine will keep pumping to 32.5 PSI before stopping to account for air loss when detaching the valve connector.
Customs and shipping fees are not included. You will be charged when we receive your items.



